Building Operations: Reducing the Spread of COVID-19

September 2, 2020 Mark Hawker

Facility Shutdown, Restart Recommendations and Guidelines

EcoVadis is glad to welcome this guest blog post from one of the experts at Anthesis Group, the parent company of Anthesis Lavola, a member of the EcoVadis training partner program.


During the worst of the COVID-19 outbreak nearly all governments around the world closed non-essential businesses and community spaces and enforced remote working for many employees. In the U.K., around 50% of people worked from home in April according to the country’s Office for National Statistics. Now, the U.K. government -- as many others -- is encouraging safe return to the office. It's vital for all businesses that have reopened or are about to reopen to adapt their practices to keep their employees and community as safe as possible.

This article  provides recommendations and guidance from Mark Hawker, Chief Engineer at Anthesis Lavola, an EcoVadis partner,  on how businesses can support the ongoing fight against COVID-19 by introducing certain building certain control measures.


Operating and Using Building Services

To reduce the opportunity for viruses and bacteria to proliferate within the building during operation, we recommend the following:

  • Increase Air Supply and Exhaust Ventilation: Increasing the volume of air moving through the building will prevent concentrations of stale air building up with a bacterial or viral load by diluting it out with fresh air. If your filters haven’t been changed for a while and are showing a distinct differential pressure, then it would be worth considering changing filters, if feasible. Exhaust ventilation from toilets should be kept on 24/7.
  • Air Recirculation Systems: Heat reclaim systems that are purely thermal and make no use of recirculated air can be left on. However, any system that uses recirculation, or any system that poses a risk that viruses/bacteria can stick to the transmission media (e.g., thermal wheels) should be switched off to prevent stale air with a bacterial or viral load being reintroduced within the building.
  • Open a Window: Opening windows where practical will increase the amount of fresh air in the building, further diluting out stale air with a bacterial or viral load.
  • High-Quality Clean Air Filters: High-quality fan/filter units with High-Efficiency Particulate Air (HEPA) elements will remove bacteria and viruses from the air, reducing the load. Typically, portable filters (which can be hired) will cover a space of around 10m².
  • Ultraviolet Systems: Ultraviolet systems are available for installation into heating and ventilation ductwork to kill viruses and bacteria. However, if airflow is maintained and recirculation is eliminated, then the incoming air should be clean, so the benefit may be minimal.
  • Restrooms: Previous work by the World Health Organisation (WHO) on SARS-COV-2 showed that flushing a toilet caused a plume of fine water spray to form above the bowl. To minimize the risk of spray, it is good practice to keep the toilet lid down when flushing, avoid using high-speed hand-dryers and keep the extraction fan on 24/7.


Things That Won’t Help

Unfortunately, COVID-19, like SARS-COV-2, is not particularly sensitive to temperature (>30°C) or humidity (>80%) in the normal range. On that basis, changing temperatures on heating or air condition or humidity levels won’t particularly help.

There has been some commentary recommending cleaning ventilation ducts to avoid transmission via ventilation systems. Duct cleaning is not effective against room-to-room infection because the ventilation system is not a contamination source if the space is well ventilated with fresh air and any routes to recirculation have been decommissioned.

Changing filters will have little benefit unless they are blocked as typical air filters will not capture bacteria or viruses as they are too small. However, if the filters are old and blocked, replacing them will increase the flow rate, which will be a benefit.


Closing Down a Building as a Consequence of COVID-19

Some businesses may still have to close facilities if they are on partial staff or still experiencing reduced orders/demand. Here are some suggestions for these circumstances:

  • Leave the heating on and turn down the temperature to 10-14°C – 10°C for a building where you aren’t too worried about damp and mould in stock, and 14°C for a building where you are worried about damp and mould (e.g., textiles).
  • Make sure all lighting and non-essential electrical equipment are turned off (not just on standby).
  • Clean out any fridges or freezers, switch them off and leave the door open to prevent mould.
  • Ensure all bins are emptied and cleaned.
  • Fill up any water traps (toilet bowls, sinks etc.) to maintain a seal against drainage.
  • Leave toilet lids down.
  • If service valves exist, isolate taps locally, but leave mains water on to the heating system.
  • Test any systems (particularly life safety systems (see life safety systems box)) that might be required whilst the building is unoccupied.
  • As the building is unoccupied, there is a higher chance of break-ins. Take extra precautions to ensure anything that would attract a thief is removed, make sure all fire doors are closed and set the alarm system (if fitted) as you leave.
  • Many buildings have Building Management Systems (BMS) and can be remotely monitored via the internet and, as a minimum, have SMART gas and electricity meters. It is advisable to monitor energy consumption at closure and thereafter to make sure it remains as expected.


Reopening a Building after Closure for COVID-19

  • Return the heating to its normal set points.
  • Test any systems that are required (particularly life safety (see life safety systems box)) are still working.
  • As vermin may have been able to get into the building, clean and wipe down all surfaces with an anti-bacterial cleaner.
  • Employ a building services technician to sanitize hot and cold water systems with chlorine or similar, paying particular attention to showers. Un-isolate any closed legs, and flush both the hot and cold water systems until the water runs clear.
  • Fill up any water traps (toilet bowls, sinks etc.) to maintain a seal against drainage.
  • Recommission any fridges to working temperature.
  • Check that light and emergency lighting are still working.
  • Check that the fire alarm, CCTV and security systems are all working.


Click here to learn more about our partnership with Anthesis Lavola. 





About the Author

Mark Hawker

Mark is Chief Engineer at Anthesis Group and manages the engineering team, overseeing engineering design and consultancy. Mark also coordinates with other team members including communications, finance and legal experts. He has a demonstrable track record in leading multi-disciplinary teams on a range of complex engineering projects to successful completion. Anthesis Lavola is an official supplier training partner of EcoVadis, and, as part of its offering, provides training and consulting to EcoVadis-rated companies.

Visit Website
Previous Article
International Equal Pay Day: How the COVID-19 Crisis Highlights the Gender Gap
International Equal Pay Day: How the COVID-19 Crisis Highlights the Gender Gap

Across all regions, women are paid c. 23% less than men. Our Sustainability Analyst explains how COVID-19 ...

Next Article
 Sustainability Ratings Key to Monitoring Supply Chain Resilience Leading Up to the COVID-19 Crisis
Sustainability Ratings Key to Monitoring Supply Chain Resilience Leading Up to the COVID-19 Crisis

Ecovadis released Business Sustainability Risk & Performance Index including insights from global supply ch...